Condensate Sticks Material Safety Data Sheets

FISHER STEVENS' CONDENSATE/SALT FOAMER contains surfactant in a solid form and is specially formulated as brine and brine/condensate foamer, and is a friction reducer for both salt water and condensate producing gas wells.

The primary application of the CONDENSATE SOAP STICKS is to foam the water and condensate in gas wells which are loaded up. This increases the flow rate of the well by lowering the hydrostatic head on the formation. The foaming of the water and condensate, combined with the increased flow rate, allows the well to unload the fluid, achieving a higher rate of production. The foaming action will often clean the well bore of deposits, which build up.

CONDENSATE/SALT WATER FOAMER is most effective by applying it in the well when the flow rate begins decreasing. The agitation of the gas flow through the water facilitates the foaming of the water when the product is applied. If a well is dead, CONDENSATE/SALT WATER FOMER is effective when used in combination with swabbing the well. The foaming action assists in the removal of the fluid by keeping the fluid column lighter while swabbing, helping to recover more fluid on each swab run. The foaming of the fluid left in the well after swabbing, combined with gas flow from the zone, can keep the well from loading up so quickly. The CONDENSATE/SALT FOAMER is soluble in water and is INSOLUBLE in oil/condensate. Water must be present to dissolve the stick.

We recommend the use of one to three sticks in a well in any one application. Every well is different in the way it will perform. Experiment with the number of sticks used and the time of their use to find the best combination for the individual well.

Condensate Sticks

Surfactant in a solid stick, formulated as a brine and brine/condensate foamer and friction reducer for both salt water and condensate producing gas wells. Condensate sticks used while swabbing will lighten the column of fluid, helping to recover more fluid on each swab run.

Quantity
FS-16 Condensate Stick 1 1/4” x 15”

(50/case or 25/toolbox)



Non-warranty
Warranty-Condition of sale: Directions for the use of this product are based on field studies. Before using, the buyer shall determine the suitability of this product for his intended use and assumes all risk and liability for consequential or incidental damages. It is important to eliminate all risk associated with the use of this product. The manner of application of this product is beyond the control of Fisher Stevens or the seller of this product. The buyer should exercise extreme care in applying this product to the well.
All risks are assumed by the buyer, Fisher Stevens makes no warranties of any kind, expressed or implied, including the fitness or merchantability for a particular purpose. In no case shall Fisher Stevens or the seller be liable for the use of this product. The foregoing is a condition of sale by Fisher Stevens and is accepted by the buyer.

Precautionary Statement: Keep away from heat and open flame. Do not breathe vapors or mist. Do not get in eyes, on skin, or clothing. Keep containers closed when not in use. Wash hands thoroughly after handling. See Material Safety Data Sheet for further information.

In Case of Fire: Use dry chemical, C02, water spray fog or alcohol foam. Closed containers may rupture or explode when heated. Keep cool with water spray.

Spills and Leaks: Scoop up and place into closed metal containers. Dispose of in accordance with local, state, and federal regulations.

Danger: After this container has been emptied do not re-use for any purpose until it has been cleaned thoroughly. All labeled precautions must be observed.

SAFETY AND HANDLING: DURING HANDLING OF THIS PRODUCT, WEAR EYE PROTECTION AND RUBBER GLOVES. IN CASE OF EYE OR SKIN CONTACT, RINSE WITH LARGE AMOUNTS OF WATER FOR AT LEAST FIFTEEN MINUTES. IF EYE CONTACT SHOULD OCCUR OR IF SWALLOWED, CALL A PHYSICIAN.

FOR INDUSTRIAL USE ONLY

KEEP AWAY FROM CHILDREN

STORE IN A COOL DRY PLACE