Peat Moss Absorbent Material Safety Data Sheets

Peat Moss Absorbent

Peat Moss Absorbent is produced from dehydrated peat. Super absorbent wicking action encapsulates fluid inside the porous structure of the peat fiber. An excellent aid in soil remediation; the humic acid in the peat helps stabilize and regenerate oil contaminated soil.

Quantity
4 cu. ft bags


APPLICATION TO PRODUCING GAS AND OIL WELLS
After a well has produced for a long period of time, the perforated interval often gets a carbonate build up on and around it. DOWNHOLE ACID can dissolve this build up and improve the production rates. The treatment amount is the same as for injection wells. The surfactant also acts as a foamer on gas wells and can aid in unloading the wells. We suggest using DOWNHOLE ACID with our SOAP STICKS, another Fisher Stevens Product, on gas wells when a scale treatment is desired in conjunction with unloading produced water from the well.

Non-warranty
Warranty-Condition of sale: Directions for the use of this product are based on field studies. Before using, the buyer shall determine the suitability of this product for his intended use and assumes all risk and liability for consequential or incidental damages. It is important to eliminate all risk associated with the use of this product. The manner of application of this product is beyond the control of Fisher Stevens or the seller of this product. The buyer should exercise extreme care in applying this product to the well.
All risks are assumed by the buyer, Fisher Stevens makes no warranties of any kind, expressed or implied, including the fitness or merchantability for a particular purpose. In no case shall Fisher Stevens or the seller be liable for the use of this product. The foregoing is a condition of sale by Fisher Stevens and is accepted by the buyer.

Precautionary Statement: Keep away from heat and open flame. Do not breathe vapors or mist. Do not get in eyes, on skin, or clothing. Keep containers closed when not in use. Wash hands thoroughly after handling. See Material Safety Data Sheet for further information.

In Case of Fire: Use dry chemical, C02, water spray fog or alcohol foam. Closed containers may rupture or explode when heated. Keep cool with water spray.

Spills and Leaks: Scoop up and place into closed metal containers. Dispose of in accordance with local, state, and federal regulations.

Danger: After this container has been emptied do not re-use for any purpose until it has been cleaned thoroughly. All labeled precautions must be observed.

SAFETY AND HANDLING: DURING HANDLING OF THIS PRODUCT, WEAR EYE PROTECTION AND RUBBER GLOVES. IN CASE OF EYE OR SKIN CONTACT, RINSE WITH LARGE AMOUNTS OF WATER FOR AT LEAST FIFTEEN MINUTES. IF EYE CONTACT SHOULD OCCUR OR IF SWALLOWED, CALL A PHYSICIAN.

FOR INDUSTRIAL USE ONLY

KEEP AWAY FROM CHILDREN

STORE IN A COOL DRY PLACE